As I have researched AFMr, I find that there are some differences with how things are connected in the backbox. There is also some variation on the backglass wiring layout.
Additionally, if you have a game topper, please send me a pic of your backbox board layout, as I may need to adjust the length of some wiring harnesses.
For the power connector, I am using an open header located in the lower left corner of the Pinball Controller board. Sometimes there is something plugged in here, but other ports in the backbox are free. Please let me know if this header is already in use on your game.
There is a similar header on the Solenoid Board, toward the left side near the middle, marked "DISPLAY". Some games may have been assembled differently? I don't know why it would vary. If this connection is open, we can use it instead for power.
If both are in use, let me know as I'll have to send you a power splitter.
This is what the "light tub" wiring looks like for the Backbox General Illumination (GI) upgrades. There is one Purple General Illumination (GI) connection, and (surprise!) two Green GI connections. The main Green GI connection is closest to the Purple GI connection (middle of the pic). The other Green GI connection is usually nearby (approx 2 inches), but sometimes there are games where the second Green GI connection is further away. Again, I do not know why there are variations, but if your game has the two Green GI connections located further than 2 inches apart, send me the distance between the two connections, and I'll send you a proper cord.
Please send me an Email with the above information, so I can assemble the proper components for your kit(s).